Premium HDMI Extender Over CAT6 Network Cable with IR (Ultra HD 4K/30Hz Over 50m)

Distributing HDMI video and audio around a home, office, point-of-sale area or other venue can be tricky, but by leveraging CAT6 (either directly or via an existing Ethernet network) it's easier than ever to send a single source to one or multiple remote displays.

The Avencore Halon Series HDMI Extender kit allows 4K@30Hz HDMI (or lower) signals to be converted for transmission over TCP/IP in a variety of modes, with as much as 120 metres of cable distance possible at full resolution. IR returns is also catered for, allowing for the source remote to function from the remote display(s). Chroma 4:4:4 and 4:2:0 sources are supported. The only compromise is latency, with up to 350ms delay between the input and the output(s).

Each sender and receiver unit is powered by the included 5V AC adapters (one for each unit) and the whole kit is largely plug-and-play with only a reset button to easily force a new handshake if any signal is lost. This kit is sold complete, with everything you need for joining one local source to one remote display. Adding additional remote displays is easy if you have an existing Ethernet network by purchasing extra Receiver Kits - AV-H-EX412(Rx).

Note: It is recommended that you limit the HDMI cables used in this setup to 2m on each end to achieve maximum performance.

Three modes of operation:

• Point-to-Point Mode (transmitter to receiver with one direct CAT6 link)
• TCP/IP Network Mode (transmitter to receiver via Ethernet Network router/switch)
• One-to-Many Mode (transmitter to multiple receivers via Ethernet Network)

Transmission Ranges:

• Up to 120m at 4K30
• Up to 200m at Full HD 1080p

Package Inclusions:

• HDMI to CAT6 transmitter
• CAT6 to HDMI receiver
• Power supply for receiver module
• Power supply for sender module
• IR reader and blaster cables
• User guide
• Colour: Black

Technical Features:

• 12 Month Avencore Replacement Warranty
• Supported Resolutions up to 4K/30Hz YUV 4:4:4
• Ultra HD up to 3840x2160 @ 30Hz
• WQHD 1440p @ 30Hz & 1080p @ 60Hz
• Connect to up to 253 additional remote displays with extra RX kits (sold separately)
• Up to 2m HDMI cables on either end supported (shorter is better)
• Please note: this device may not be compatible with Foxtel / AppleTV / Austar devices.
• Units measure: 120mm x 95mm x 24mm and 210g each

Cable Chick Tip: This package does not ship with cables. If you need some, we offer great 4K HDMI and awesome CAT6 cable right here at Cable Chick. Check 'em out!